Protomac H SPL Series
Balmerol Protomac H SPL Series are superior quality High Viscosity Index hydraulic oils, meant for modern hydraulic systems requiring high shear stability and operating at extreme temperatures. Balmerol Protomac H SPL Series oils are formulated with special quality high viscosity index improver and synergistic additives for imparting anti-wear, anti-corrosion, oxidation inhibition and anti-foam properties. It meets IS: 11656-1986 (Reaffirmed) and IS: 10522-1983 (Reaffirmed 2004) Specifications.
Buying Link:
Available Size:
500ml 1L 0.35l
Features & Benefits:
- Can operate at wider range of temperatures. Better equipment protection both at very low & high temperature
- Ensuring longer service life of fluid under severe operating conditions
- Components remain clean during operation, lesser clogging of filters, control valves etc.
- Reduction in wear of components like pumps, valves etc leading to higher equipment reliability
- Easily sheds off water from the oil and ensures better component protection
Applications / Recommendations:
- For best performance, contamination of Balmerol Protomac H SPL Series oils with other lubricants, especially detergent based engine oils should be avoided.
Balmerol Protomac H SPL Series
| Properties | Protomac H 32 SPL | Protomac H 46 SPL | Protomac H 68 SPL | Protomac H 100 SPL | |
|---|---|---|---|---|---|
| ISO VG Grade | 32 | 46 | 68 | 100 | |
| Viscosity, ASTM D 445 cst @ 40°C | 32 | 46 | 68 | 107 | |
| Viscosity Index, ASTM D 2270 | 145 | 145 | 145 | 135 | |
| Pour Point, °C ASTM D 97 | -39 | -36 | -30 | -27 | |
| Flash Point, °C ASTM D 92 | 210 | 210 | 210 | 236 | |
| Specific Gravity, ASTM D 1298 | 0.864 | 0.865 | 0.869 | 0.876 | |
| Copper Strip Corrosion, ASTM D 130, 3 hrs @ 100°C | 1a | 1a | 1a | 1a | |
| Rust Characteristics, ASTM D665 | ASTM D 665/A | Pass | Pass | Pass | Pass |
| ASTM D 665/B | Pass | Pass | Pass | Pass | |
| FZG Test (A/8.3/90), Fail Stage, DIN 51354 | 12 | 12 | 12 | 12 | |
| Foam Sequence, ASTM D 892 | Sequence I | Nil | Nil | Nil | Nil |
| Sequence II | Nil | Nil | Nil | Nil | |
| Sequence III | Nil | Nil | Nil | Nil | |
| Neutralization No, TAN mg KOH/g | 0.4 | 0.4 | 0.4 | 0.4 | |
| Air Release Value, ASTM D 3427 | 5 | 7 | 7 | 10 | |
| Demulsibility, ASTM D 1401 (40 - 37 - 3) minutes | 11 | 15 | 15 | 20 |
